Neophix Heavy Duty Band Clamps are designed for applications requiring greater strength, larger diameters and higher clamping loads than conventional hose clamps.
Used extensively on exhaust systems, silencers, fuel tanks and other heavy-duty assemblies, the range is available in a wide variety of material thicknesses, widths and fastening arrangements to suit different operating conditions and installation requirements.
Band thicknesses range from 1.22mm to 3.0mm, with widths from 25mm to 76mm. With more than 50 standard styles available, clamps can be configured to suit a broad range of diameters, loads and application requirements.
Where space constraints do not allow the use of conventional T-bolt fittings, the NX14 Capscrew & Trunnion style can be used. This arrangement also allows the individual fastening components to be removed and replaced where required.
For applications where clamps are removed and refitted regularly, the NX14QR incorporates a quick-release machined trunnion to reduce installation and removal time.
Alternative fastening arrangements including quick-release levers, latches, links and hinges are also available. Our technical team can assist with selecting a suitable clamp configuration for specific applications.
Click the image thumbnail to view full size
Neophix manufactures more than 50 different Heavy Duty Band Clamp styles. A selection of commonly supplied configurations is shown below.
Click the image thumbnail to view full size
Neophix Heavy Duty Band Clamps can be configured to suit a wide range of diameters, loads and operating environments. Band width, material thickness, fastening arrangement and material specification can be selected according to the requirements of the application.
| Feature | Available Range / Options |
| Diameter Range | 40mm to 2500mm |
| Band Width | 25mm to 76mm |
| Band Thickness | 1.22mm to 3.0mm |
| Clamp Styles | More than 50 standard configurations |
| Materials Available | CR4 with various finishes, Aluzink, Aludip, AISI 304, AISI 316, AISI 316Ti, AISI 321, Inconel 625, Inconel 718 and Titanium 6Al-4V |
| Application Temperature | Up to 1000°C, dependent on material and clamp configuration |
| Fastening Options | T-bolt, capscrew & trunnion, quick-release arrangements, latches, links and hinges |
| Special Requirements | Bespoke sizes, materials and configurations available |
The following figures provide the maximum tightening torque values currently specified for commonly used bolt arrangements.
| Bolt / Material | Maximum Tightening Torque |
| M8 AISI 302 | 20.3Nm |
| M8 Grade 8.8 | 25.3Nm |
| M8 Grade 12.9 | 42.7Nm |
| M10 Grade 8.8 | 50.9Nm |
| M10 Grade 12.9 | 86.8Nm |
Click the image thumbnail to view full size



